My Workbench

Saturday, September 28, 2013

1:1200 Davco Dutch 64 Gun Prince Frederick

Well it has been a productive summer in all things but finishing my Dutch fleet. I did finish another Navco 64, but since it was much like the one in my last post I didn't feel it was worthy of another post.

So now, due to a few rainy days, I have been able to finish a Davco Dutch 64. Davco titles this one the Prince Frederick. From everything I can find the Prince Frederick was indeed a Dutch ship, but this was the name the British gave it after they captured it at Saldhanha bay in 1796. www.ThreeDecks.org  has conflicting information on this ship stating in one place it is a 64 gun and in another a 68 gun. In different entries it states the Prince Frederick was the Dutch Revolutie and in another it was the Dutch Prins Frederick. Possibly it was both, being built as the Prins Frederick, renamed the Revolutie, then back to Prince Frederick after capture. Davco lists this ship as a 64 gun with armament as follows:

Lower gun deck: 26 x 24 pounders
Upper gun deck: 26 x 18 pounders
Quarterdeck & Forecastle: 14 x 8 pounders

ThreeDecks lists a different armament for 68 guns (not counting carronades) as follows:

Lower gun deck: 24 x 24 pounders
Upper gun deck: 26 x 18 pounders
Quarterdeck: 10 x 9 pounders
Forecastle: 2 x 9 pounders & 2 x 24 pounder carronades
Roundhouse: 6 x 18 pounders

The Davco model reflects the 64 gun version. My next ship is the Langton 68 gun Dutch 3rd rate, which more reflects the ThreeDecks version.

Photos:




Masts and sails mounted




Time to make the ratlines.

Standing rigging done and upper mizzen ratline attached.

Glue down thread for the shape.

Cut on the outside of the thread. Then trim to size and attach to the channels and masts for the lowers, and the fighting tops and topmasts for the uppers.

Ratlines mounted.













Sorry about this one. I can't get it to rotate on the blog. It's right side up in my files??






Comparison shot: Navar 64 "Revolutie" on the left. Davco 64 Prince Frederick on the right. Supposed to be the exact same ship. Shows just how different manufacturers are when producing the same named ships. Hard to determine who's ships are accurate, if any of them are at all?

My six Dutch SOLs. Four 64's and two 50's. One 68 and four 32 gun frigates to go.
OOPS! Just realized after reviewing these photos that the pennant is upside down. Here are a couple of photos with it corrected.

















Friday, July 12, 2013

Navwar Dutch 64 Gun Finished

(Note: This is the first ship I rigged correctly after receiving Rod Langton's rigging guide.)

I finally finished the rigging for this ship. I haven't picked a name for it yet. It is based on Navwar's 64 gun Revolutie. I do not know how many ships were built in this class since information on the Napoleonic period Dutch ships is not easy to find. This is the general armament and crew of the ship:


The modifications include scratchbuilt masts, yards, brass sails, shrouds/ratlines, and base.


















Here is my Dutch fleet so far"


Saturday, June 15, 2013

Update - Two Navwar 1:1200 50 Gun Ships

A good friend in the UK pointed out that I was not rigging the mizzen masts on my non-British ships correctly. I have been rigging all of my different nation ships British style. The Royal navy rigged it's mizzen mast yards back to the driver. All other nations rigged the mizzen yards forward to the main mast. He also was extremely generous and sent me a copy of Rod Langton's book on painting and rigging 1:1200 ships. Thank you from the bottom of my heart Rory!

Here is the 50 gun ship Rotterdam with the mizzen yards correctly rigged to the main mast:


Summer Hiatus - 64 Gun Dutch Navwar

I haven't posted anything since April for the simple reason that I haven't done anything since April. The "Honey Do's" are all encompassing since the weather has changed. We are 3" below are normal rainfall so I have had no excuse to stay indoors and work on miniatures. I have accomplishe a great deal unrelated to wargaming however. I have put a large number of plants and trees in the ground, put in new water lines for said plants/trees, built a 40' x 12' pad on the end of the barn, replaced all of the electric fence ribbon on the horse fenceing, repaired a lot of that same fencing, and built steps and a deck around the spa on the back patio. I am only about a quarter way through the to do list. A storm went through yesterday and I actually got to set down for several hours and rig one of the two Navwar Dutch 64's that have been sitting on my workbench since April. I have only mounted the mast sails, ratlines, and standing rigging so far. I still have the sprit sail, forestay and jib salis to mount and the running rigging to do to finish. here are photos of the progress so far on these 64's.

Both painted hulls and the scratchbuilt masts
Dressing up the scratchbuilt brass sails




Still a long way to go. I will post the completion photos when I'm done.......sometime in October?????

Saturday, April 13, 2013

Two Navwar 1:1200 50 Gun Ships

(I note that this post gets viewed frequently so I want to point out that the rigging is incorrect, done before I had a good reference to go by.)

Here I present the completed Navwar Dutch 4th rate 50 gun ships Rotterdam and Batavier.

The Rotterdam was launched in 1761. Her dimensions were Length 136'; Beam 39'; Depth 15'; 937 tons.  Her compliment was 350 men and boys.
Armament:
24 x 18 pounders
24 x 12 pounders
8 x 8 pounders
She was captured in 1781 by the British.

The Batavier was launched in 1779. Her dimensions were Length 144'; Beam 40'; Depth 16'; 1048 tons. Her complimen was 300 men and boys.
Armament:
22 x 24 pounders
24 x 12 pounders
8 x 6 pounders
She was captured in 1799 by the British.

These ships are typical for Navwar, taking a considerable amount of work. New masts, sprit and jib boom had to be built for both ships. I use two methods for sails for these ships. For the Rotterdam I cut new sails out of thin brass sheet, attached clew lines and yards, then painted them. For the Batavier I cut the Navwar sails off of the spindly masts and reshaped them using a small sanding drum attached to my Dremel tool. Then I attached clew lines and yards to the modified sails and painted them.

In the photos below the Batavier is on the left and the Rotterdam is on the right. I would sincerely appreciate comments or votes on which sail set looks the best, the modified sails on Batavier or the scratch-built brass sails on the Rotterdam.










Thank you for looking and don't forget to vote for wich sails look best - the modified molded sails on the left, or the scratch-built brass sails on the right.