My Workbench

Sunday, April 9, 2023

1/2400 Scratch Built German Battleship Bismarck 1941


Today I finished my first scratch built 1/2400 scale WWII ship, the Bismarck. I was inspired by a painting tutorial YouTube on the Little Wars TV channel. The gentleman was painting a 3D print of Bismarck, and I thought "How simple!" So then insanity took over and I downloaded hundreds of colored ship profiles from Pinterest. Then I inserted all of them into a Word document, calculated the size at 1/2400 scale for each of them, and shrunk them down. Then I printed them out and put them in a 3-ring binder. I started with Bismarck, since that was the video I watched I suppose. 


Then using a sheet of carbon paper, I traced out the deck onto a sheet of  3/32" bass wood.


Then I sanded and shaped the hull with a nail file



Note that I scored the deck with a knife for a plank effect

Now came the hard part, drawing and cutting out each successive layer of the superstructure and gluing the tiny pieces on, one level at a time. I used balsa wood and paper card.


The large gun turrets are balsa and the gun barrels are 30lb test monofilament line. The deck is Oak and the superstructure base is London Gray. Black India ink wash over recesses.

The smaller gun turrets are thick card with 20lb test monofilament guns

Almost done. Superstructure and guns dry brushed with French Gray then Pale Gray.







At this point I was almost done. But I felt the ink wash I had done earlier was just not standing out enough, so I repeated it. Then I had to do a bit more dry brushing with French Gray and Pale Gray, plus a bit of deck touch up.

The base is 1"x5" matt board. Waves were sculpted with the PVA/tissue technique. Painted with Navy blue and wave tops lightly dry brushed with white. The model was sealed with ModPodge matt sealer spray. Then the water was coated with ModPodge gloss. In this photo the tiny anti-aircraft batteries show up. I made them with Play-Doh and brush bristle guns.





My next build will be a 1/700 waterline IJN ship. Either the Yamato or the WWI Battleship Mikasa.


 


Tuesday, April 4, 2023

1/1000 Scale Alamo Terrain


I have always been fascinated by the Texas struggle for independence and the last stand at the Alamo. beginning with Disney's 1955 "Davey Crocket at the Alamo" and Republic Pictures' "The Last Command" the same year. Then came my favorite, John Wayne's "The Alamo" in 1960! I will never forget that experience, sitting in a lounge chair in the back of a pickup truck at the Bordertown Drive In Theater, freezing my little 8 year old butt off in November! But I didn't care because I was mesmerized! A month later I was ecstatic to find the Marx Alamo Playset under the Christmas tree! Wow!  


Then along came the 2004 "The Alamo" movie with a bit less mythic depiction of the events, albeit more realistic. It was still good and I enjoyed it thoroughly. But it just doesn't hold the magic for me that the 1960 version does. While working on this project, I watched every one of these movies again in the order they came out and I still like them all.

To start with, I found a free 3D STL file on Thingyverse.com for the Alamo compound. I reduced and printed it out at 1/1000 scale. It wasn't very accurate so I cut it up to rebuild it. There are so many drawings and artist renditions of the original 1836 compound, and few of them match! so it was difficult to determine which was correct. Even the San Antonia mission park website has conflicting illustrations. I ended up taking what I considered to be the most consistent elements from all of them to configure my Alamo compound.

I started with a 10"x12"x1/4" foam sheet. Then I glued the modified compound to it and carved the arroyos and irrigation ditches. I then coated the whole thing with diluted black paint and ModPodge. I used vinyl spackle to contour and coat the foam, and another ModPodge coat over that. I used a base coat of earth brown, followed by successive dry brushing of brown tan, trail tan, and desert dune. The trees are twisted strand wire frames coated with white modeling putty, and PVA glued foam flock leaves. The sage and mesquite are pieces of painted lichen. The abatis are made of dried weeds from the yard as well as the represented cut stumps the defenders obtained them from. The palisade wall portions are reduced printed photos, glued together back to back over heavy bond card. I also had to add additional gun platforms and stairs or ramps in places. The cannon were difficult at this scale and I did the best I could using bits of card and monofilament fishing line. They are a bit large for the scale. The defenders are all 1/800 scale Eduard photo-etched naval figures painted as Texicans. Their guns are all bristles from a shoe brush. I could not find any troops to represent the massed Mexican army attackers that satisfied what I was looking for, so I decided to stop here and move on to other projects. Sometime in the future I may find the perfect solution. I hope you like it.







Working on the impossibly small field pieces 

The 18 pounder












Playing around with the thought of framing it....Nah!

Overhead shot with all of the defenders in place


Strings of horses in the coral area

Travis's blue regulars on this north end

Hung on the wall

   


Sunday, March 5, 2023

Lindberg 1/144 Santa Maria

 A few Christmases ago my youngest daughter gifted me the Lindberg 1/144 scale box set of Columbus' three ships. 


I built the Nina and Pinta a long while back. It was quite a challenge to make those very plain and simple models look respectable. And this last one was no exception. 




I had to add a lot of detail. The stern was just a blank, no channels, the super thick flags attached to the masts had to be removed and replaced with new flags. A stern spar was added and the anchor modified. Like the other two models, the supplied cannon were from a much later era so I had to make some short ship bombards to fit the narrow space available. I also added gratings and coiled ropes where I deemed appropriate.










Thank you for stopping by. I'm not sure what I'll work on next, there are so many ideas floating around up there.